BE P2314EN - 2300 PSI 1.7 GPM Electric Pressure Washer
The BE P2314EN is an electric pressure washer offering a maximum water pressure of 2300 PSI and flow of 1.7 GPM. (Read full specs)
Amazon Page Content
Description
Zoom on the BE P2314EN
The BE P2314EN is a medium duty pressure washer, that provides its users with an all-around versatile cleaning experience, and enables:
- spot cleaning of hard, unpainted surfaces, reaching high areas, and removing stubborn stains
- complete cleaning of hard surfaces, vehicle washing, and surface prep for painting
- soft cleaning of delicate surfaces, and gentle cleaning for larger areas with low pressure
Ahead are presented its power characteristics and design, its main features and any other additional features.
Power
With a 13-amp universal motor, its axial cam pump delivers a pressure of 2300 PSI (roughly 38 times more than a standard garden hose) and a flow of up to 1.7 GPM (values claimed by the manufacturer), resulting in the BE P2314EN's cleaning power of 3910 Cleaning Units.
The P2314EN starts up effortlessly with a quick press of an ON/OFF switch, ensuring ease of use. The unit is ready-to-use with peace of mind, thanks to the included 35 ft GFCI cord.
Design & Handling
The hand truck design of the BE P2314EN ensures effortless movement and transportation. Guaranteeing longevity, the robust steel tubing frame offers stability and protects internal components, even when subjected to demanding tasks. The rubber-padded fixed handle adds to the P2314EN convenience of transport, while offering a comfortable grip.
At just 30 lbs, this unit is incredibly lightweight, ensuring hassle-free mobility wherever you need it. Adding to its lightweight construction, two 8" never-flat wheels are included, simplifying mobility and transport.
In addition to that, the unit can be detached from the frame to become a versatile hand-carry device that allows you to use it anywhere on-the-go.
Main Features
The BE P2314EN comes with a spray gun, a wand, a pressure hose, 5 nozzles and a detergent addition feature, which are detailed below.
- Soap addition: Detergent is added to the water at the exit, by attaching the included foam cannon to the end of the wand. The foam cannon features a dial to allow you to manually choose the detergent dilution ratio.
- Pressure hose: With a set of convenient hooks, the unit offers a practical solution for maintaining workspace order, allowing the included 25 ft high-pressure hose to be neatly stored when idle.
- Spray gun and wand: The included classic ergonomic spray gun and its wand can be easily stored in a side hook.
- Nozzles: The following table provides information on the 5 included nozzles and their recommended surface uses.
0° | 15° | 25° | 40° | Turbo | |
|---|---|---|---|---|---|
| Concrete, brick, masonry | |||||
| Siding, gutters, house | |||||
| Fencing, deck, patio | |||||
| Lawn equipment, boat, RV |
Please note: The shapes of the nozzles depicted above are for illustration purposes and may vary. Symbols used include a for 'Not recommended,' a for 'Suitable,' and an for 'Use with caution.'
Other Features
The BE P2314EN
- Wall-mountable: The unit can be stored on the wall thanks to a wall mount kit (not included). This is a welcomed feature when we need a neater storage solution or to clean the same area regularly (garage, barn, workshop, storage room, etc.)
- Total Stop System (TSS): This feature automatically shuts off the pressure washer when the trigger is not engaged, to prolong the pump's lifespan.
- Onboard storage: With the BE P2314EN's handy storage area, you’ll always have all the necessary nozzles and accessories at hand and thus, you’ll be fully prepared for any job.
- Safety: Safety of operation is enhanced by a trigger lock mechanism (which prevents accidental operation).
- Accessories: Besides the usual owner's manual (opens in a new tab) and documentation to get you promptly started, the BE P2314EN comes with pressure hose, nozzle cleaner, power cord, foam cannon (to add cleaning solutions to the water), wand and spray gun.
The BE P2314EN's performance versus other pressure washers
The following charts are provided to give you an idea of how the key specs of the BE P2314EN compare to similarly priced pressure washers.
Note: Even though we couldn’t list its price on this page, our research indicates that some retailers sell this unit around $350.
- Among electric-powered pressure washers priced between $300 and $400, the BE P2314EN with 2300 PSI achieves a lower pressure. If you're going after the highest possible power of the water stream, one of the best in this price range is the Westinghouse WPX3400e that can reach up to 3400 PSI.
- With a maximum GPM of 1.7 (gallons per minute), this washer belongs to the top in terms of water flow, in its respective price range. If rinsing away debris most efficiently is your priority, one of the devices with the highest GPM in this price range is the Greenworks GPW2702A, which can reach up to 2.3 GPM.
- The P2314EN, with its 3910 Cleaning Units (PSI X GPM) sits at the high end of the cleaning efficiency spectrum, when compared to other devices of similar price.
Price comparison
As you can see from this interactive chart, when compared to other electric washers between 3400 and 4100 Cleaning Units, the BE P2314EN is on the expensive side of the price range.
While certainly not the cheapest of its cleaning power range, purchasing it could most likely also mean enjoying the reliability of a high-end product.
The bottom line
- 5 year (limited) warranty (after registration)
- Versatile design
- Good range of nozzles included
- Wall-mountable
- Onboard storage
- High GPM for the price
- High CU for the price
- On the expensive side
- Wall mount kit not included
- Low PSI for the price
Do you own the BE P2314EN and agree (or disagree) with these strengths and weaknesses?
Let us know and write your own review.
Features and Specifications
| Fuel | Electric |
|---|---|
| Motor | Powerease 13-amp, universal |
| Pump | Annovi Reverberi Axial Cam |
| Water | Cold |
| PSI | 2300 |
| GPM | 1.7 |
| Cleaning Units | 3910 |
| Frame | Steel tubing |
|---|---|
| Handling | Hand Truck |
| Wheels | 2 wheels, ⌀8", never flat |
| Weight | 30 lbs |
| Dimensions | Approx. 16 x 15 x 38 in (L x W x H) |
| Hose storage | Hooks |
| Soap injection | Via foam cannon |
|---|---|
| Soap dilution | Adjustable |
| Nozzles | 0°, 15°, 25°, 40°, Turbo |
| Quick connect nozzles | No |
| Onboard storage | Yes |
| Hose | 25 ft |
| Security | Trigger lock |
|---|---|
| Included accessories | Nozzle cleaner, wand, spray gun, high pressure hose, foam cannon, 35 ft GFCI power cord, 5 nozzles |
| Warranty | 5 years |
| Series | Workshop |
| UPC | 777987355453 |
We've taken extra care to research and verify each of the specifications above. That said, occasional mistakes or omissions are still possible. If you spot any missing or inaccurate information, feel free to suggest a correction so we can address it.
About BE Power Equipment
BE Power Equipment, founded in 1991 in Abbotsford, British Columbia, manufactures industrial power equipment for commercial and professional use. Originally established as BE Pressure Supply, the company has grown its presence across North America, with a U.S. manufacturing facility in Shakopee, Minnesota, and distribution centers in Oregon and Florida. Its product range includes pressure washers, air compressors, generators, and water pumps, designed for a variety of heavy-duty applications. BE Power Equipment supplies dealers and customers across North America and exports to over 30 countries worldwide.
Warranty Information
The BE P2314EN is covered under a warranty for up to 5 years (after product registration). This warranty may be limited and may not cover all parts of the unit.
For more information about the warranty of BE pressure washers, please consult BE Power Equipment's warranty policies (opens in a new tab). Alternatively, you can also contact their Customer Support: 1-866-850-6662.
